Dell P93F User Manual

Steps
1. Route and adhere the display cable on the display back cover.
2. Connect the display cable to the connector on the camera module.
3. Adhere the adhesive tape to cover the camera module.
Next steps
1. Install the P-sensor.
2. Install the display panel.
3. Install the display bezel.
4. Install the display assembly.
5. Install the middlecap.
6. Install the speakers.
7. Install the system board.
8. Install the inner frame.
9. Install the heat-sink assembly.
10. Install the GPU card.
11. Install the GPU power cable.
12. Install the SD card reader.
13. Install the keyboard.
14. Install the keyboard lattice.
15. Install the SIM card.
16. Install the primary memory.
17. Install the WWAN card.
18. Install the WLAN card.
116
Removing and installing components

Dell P93F Specifications

General

Brand	Dell
Model	P93F
Category	Laptop
Language	English