46 Installing System Components
Inside the System
In Figure 3-1, the system cover is opened to provide an interior view of the
system.
Figure 3-1. Inside the System
The system board can accommodate one processor, four expansion cards, and
four memory modules. The hard drive bays provide space for up to two SAS
or SATA hard drives. Drive bays in the front of the system provide space for
an optical drive, an optional tape drive or second optical drive, and an
1 power supply 2 heat sink and shroud assembly
3 system board 4 hard drives (2)
5 3.5-inch drive bay 6 tape backup unit
7 5.25-inch drive bays (2) 8 bezel sliding plate release
9 drive cage 10 processor cooling fan
book.book Page 46 Wednesday, June 24, 2009 8:21 AM
To Next Page
Loading...
Need help?
General