Dell S320 User Manual

36 Using Your Projector
4 TEMP warning light If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 126 and "Guiding Signals" on
page 132.
5 Enter Press to confirm the selection item.
6 IR Receiver Point the remote control towards the IR receiver
and press a button.
7 Right / Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE: Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
8 Down / Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+37/-40 degrees).
9 Left / Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
10 Menu Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.

Dell S320 Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	0.4 - 3.82 m
Projection technology	DLP
Supported aspect ratios	16:9
Contrast ratio (typical)	2200:1
Screen size compatibility	31.45 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 37 °
Offset	115 %
Throw ratio	0.62:1
Zoom capability	Yes
Focal length range	- mm
Lamp power	240 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720i
Analog signal format system	NTSC, NTSC 4.43, NTSC J, NTSC M, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1
RMS rated power	5 W
Number of built-in speakers	1
HDMI version	1.4a
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	3
Noise level	35 dB
Noise level (economic mode)	31 dB
Placement	Desktop
Product type	Short throw projector
Product color	White
Market positioning	Short throw
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	305 W
Power consumption (PowerSave)	15 W
Storage temperature (T-T)	0 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	0 - 80 %

Weight and Dimensions

Depth	220 mm
Width	288 mm
Height	92 mm
Weight	3180 g