About your monitor
16
|
Plug and play capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the
system can configure itself and optimize the monitor settings. Most monitor
installations are automatic, you can select different settings if desired. For more
information about changing the monitor settings, see
Operating your monitor.
LCD monitor quality and pixel policy
During the LCD Monitor manufacturing process, it is normal for one or more
pixels
to become fixed in an unchanging state which are hard to see and do not affect
the display quality or usability. For more information on Dell Monitor Quality and
Pixel Policy, see Dell Support site at www.dell.com/support/monitors.
Maintenance guidelines
Cleaning your monitor
WARNING: Before cleaning the monitor, unplug the monitor
power cable from the electrical outlet.
CAUTION: Read and follow the Safety Instructions before cleaning
the monitor.
For best practices, follow the instructions in the list below while unpacking, cleaning
or handling your monitor:
To clean your screen, lightly dampen a soft, clean cloth with water. If possible, use a
special screen-cleaning tissue or solution suitable for the anti-static coating. Do not
use benzene, thinner, ammonia, abrasive cleaners or compressed air.
U
se a lightly-dampened cloth to clean the monitor. Avoid using detergent of
any kind as some detergents leave a milky film on the monitor.
I
f you notice white powder when you unpack your monitor, wipe it off with a cloth.
To help maintain the best image quality on your monitor, use a dynamically
changing screen saver and turn off your monitor when not in use.
Handle your monitor with care as the black-colored monitor may get scratched
To Next Page
Loading...
Need help?
General
