Dell SE2719HR User Manual

20
|
Setting up the monitor
Organizing cables
Use the cable-management slot to the cables connected to your monitor.
Removing the stand
NOTE: To prevent scratches on the screen when removing the stand,
ensure that the monitor is placed on a soft and clean surface.
To remove the stand:
1.
Place the monitor on a soft cloth along the desk.
2.
Tilt the stand downwards to access the release button.

Dell SE2719HR Specifications

General

Color	black
Screen Type	led
Tiltable	yes
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Pixel Pitch	81 pixels per inch
VGA Ports	1
Power Saving Mode	0.5 watts
Power Consumption	23 watts
Depth with Stand	7.4 inches
Width with Stand	24.1 inches
Depth without Stand	1.8 inches
Height without Stand	14.3 inches
Net Weight without Stand	10.7 pounds