Dell SE2719HR User Manual

Operating your monitor | 43
1. Select the Desktop tile to switch to classic desktop.
2.
Right-click on the desktop and click Screen Resolution.
3.
Click the drop-down menu of the Screen Resolution and select 1920 x 1080.
4.
Click OK.
In Windows 10:
Right-click on the desktop and click Display Settings.
pixels by performing the
Setting display resolution to 1920 x 1080
For best performance, set the display resolution to
following steps:
If you do not see the recommended resolution as an option, you may need to update your
graphics driver. Use one of the following methods to update the graphics driver:
Dell computer
Go to www.dell.com/support, enter your service tag, and download the latest driver
NOTE: If you are unable to set the resolution to 1920 x 1080 please
contact Dell to inquire about a graphics adapter that supports these
resolutions.
1.
2.
3.
4.
1.
2.
Setting up your monitor
for your graphics card.
After installing the drivers for your graphics adapter, attempt to set the resolution to
In Windows 7:
1.
2.
3.
Right-click on the desktop and click Screen Resolution.
Click the drop-down menu of the Screen Resolution and select 1920 x 1080.
Click OK.
In Windows 8 or Windows 8.1:
Click Advanced Display Settings.
Click the drop-down menu under Resolution and select 1920 x 1080
Click Apply.

Dell SE2719HR Specifications

General

Color	black
Screen Type	led
Tiltable	yes
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Pixel Pitch	81 pixels per inch
VGA Ports	1
Power Saving Mode	0.5 watts
Power Consumption	23 watts
Depth with Stand	7.4 inches
Width with Stand	24.1 inches
Depth without Stand	1.8 inches
Height without Stand	14.3 inches
Net Weight without Stand	10.7 pounds