Electrical Specifications
Physical Characteristics
Environmental Characteristics
Horizontal
Frequency
(kHz)
Sync Polarity
(Horizontal/Vertical)
Analog RGB, 0.7 Volts +/- 5%, positive polarity at
75 ohm input impedance
Digital DVI-D TMDS, HDMI, 600mV for each
differential line, positive polarity at 50 ohm input
impedance
Audio Input and Output signals
Input signal level: 2Vrms without chipping
Synchronization input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on
green)
AC/DC Adaptor input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
For use only with power supply DELL,
DA65NS4-00.
120 V: 30 A (Max.)
240 V: 60 A (Max.)
15-pin D-sub miniature, blue connector; DVI-D, white connector; HDMI, Black connector
Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor
HDMI: Detachable, HDMI-A, Solid pins, shipped without cable
0°to40°C(32°to104°F)