USB Downstream Connector
USB Ports
l 1 upstream at bottom
l 3 downstream at side
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor
installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the monitor.
Monitor Specifications
4-pin Side of the connector
4-Pin Side of the Signal Cable
NOTE:USB2.0functionalityrequiresaUSB2.0-
The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds
to resume normal functionality.
21.5 inches (21.5-inch measured diagonally viewable image
size)
Preset display area:
Horizontal:
Vertical:
475.2 mm (18.71 inches)
267.3 mm (10.52 inches)
178°(vertical)typical,178°(horizontal)typical
Glare with Anti-Smudge coating (4H)
8 ms with Overdrive (g-to-g)