48 | Operating the Monitor
Setting the Maximum Resolution
To set the maximum resolution for the monitor:
In Windows
®
7, Windows
®
8, Windows
®
8.1 and Windows
®
10:
1.
For Windows
®
8 and Windows
®
8.1 only, select the Desktop tile to switch to
classic desktop.
2.
Right-click on the desktop and click Screen Resolution.
3.
Click the Dropdown list of the Screen Resolution and select 2560 x 1440.
4.
Click OK.
If you do not see 2560 x 1440 as an option, you may need to update your graphics
driver. Depending on your computer, complete one of the following procedures:
If you have a Dell desktop or portable computer:
∞
Go to http://www.dell.com/support, enter your service tag, and download the
latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
∞
Go to the support site for your computer and download the latest graphic
drivers.
∞
Go to your graphics card website and download the latest graphic drivers.
Using the Tilt, Swivel, Vertical Extension, Rotation
and Dual Monitor Setup
NOTE: This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for set up instructions.
Tilt, Swivel
With the stand attached to the monitor, you can tilt and swivel the monitor for the
most comfortable viewing angle.
5°
21°
45°45°
NOTE: The stand is detached when the monitor is shipped from the factory.
To Next Page
Loading...
Need help?
General