Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory
module pops up.
2. Slide and remove the memory module from the memory-module slot.
NOTE: Repeat step 1 and step 2 to remove the other memory module if available on your computer.
Installing the memory
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the installation
procedure.
Removing and installing components
19
To Next Page
Loading...
Need help?
General
