To Next Page

To Previous Page

Removing and installing components

NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Recommended tools

The procedures in this document may require the following tools:

● Phillips screwdriver #0

● Phillips screwdriver #1

● Torx #5 (T5) screwdriver

● Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and

then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is

restored when the component is replaced.

NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when

replacing a component.

NOTE: Screw color may vary with the configuration ordered.

Table 1. Screw list

Component Secured to Screw type Quantity Screw image

Base cover Palm-rest and

keyboard assembly

M2x3 8

Battery Palm-rest and

keyboard assembly

M2x3 4

Battery Palm-rest and

keyboard assembly

M2x4 4

Right fan System board and

palm-rest and

keyboard assembly

M2x4 1

I/O board shield I/O board M2x4 1

I/O board Palm-rest and

keyboard assembly

M2x4 1

Left fan System board and

palm-rest and

keyboard assembly

M2x4 2

Solid-state drive 1 System board M2x2 1

8 Removing and installing components

Dell XPS 15 9510 User Manual

Other manuals for Dell XPS 15 9510