21
Changing the oven light
1. Disconnect the electrical power supply (for example, by switching off the main
power switch).
2. Unscrew the light cover
3. Fit a new bulb.
4. Refit the cover.
Note:
Use only bulbs designed to resist up to 300°C with the following characteristics: 15 W,
230 V, type E-14.
Triple ring burner
The triple ring burner must be correctly positioned (see fig. 6.3); the burner rib must be
enter in their logement as shown by the arrow.
The burner correctly positioned must not rotate (fig. 6.4).
Then position the cap A and the ring B (fig. 6.4).
Fig. 6.3
Fig. 6.4
A
B