DeLonghi DTC 90 DF User Manual

8
A
U
T
O
The electronic programmer is a device with the following functions:
– 24 hours clock with illuminated display
– Timing of oven cooking with automatic switch-off (max. 99 minutes).
ELECTRONIC CLOCK
Upon immediate connection of the oven or after a mains failure, three zeros will flash
on the programmer panel.
To set the clock it is necessary to push the button and then, within 7 seconds, the
or button until you have set the correct time.
The clock will show zero after a mains failure.
Attention: When the programmer display shows three flashing zeros the oven cannot
be switched on.
The oven can be switched on when the symbol is shown in the display.
SETTING THE FREQUENCY OF THE ALARM SOUND
The selection from 3 possibilities of sound can be made by pressing the button.
Fig. 3.1
Electronic clock/end cooking timer
3
3
(main left oven only)

DeLonghi DTC 90 DF Specifications

General

Brand	DeLonghi
Model	DTC 90 DF
Category	Cookers
Language	English