DeLonghi ECAM 23 User Manual

11
TurnthedialtoMINforanextramildcoeeandtoMAXforan
extra strong coee�
Please note:
• Thersttimeyouusetheappliance,youwillneedtomake
a number of coees to identify the correct dial position
through trial and error�
• Do not turn the dial too far towards MAX, otherwise the
coee may be delivered too slowly (in drops), particularly
when making two cups of coee at the same time�
Selecting the quantity of coee in the cup
The appliance is set by default to automatically make the
following quantities of coee:
- short espresso coee, when the button is pressed
(≃40ml);
- long espresso coee when the button is pressed
(≃120ml);
- two short espresso coees when the button is
pressed;
- two long espresso coees when the button is
pressed�
Programming the quantity of coee
To change the quantity of coee the appliance delivers
automatically into the cup, proceed as described below:
- press the button corresponding to the quantity to be
modied and hold it down until the indicator for short
espresso coee or long espresso coee ashes� The
appliancestartsdeliveringcoee.Releasethebutton;
- when the coee in the cup reaches the desired level, press
the same button again to memorise the new amount�
The machine is now reprogrammed with the new quantities�
Please note:
It is possible to memorise just the single cup quantity� The two
cup quantity reprogrammes automatically�
Adjusting the grinder
The grinder is set by default to prepare coee correctly and
should not require regulating initially�
However, if after making the rst few coees you nd that the
coee is either too weak and with not enough crema or delivery
is too slow (in drops), this can be corrected by adjusting the
grind coarseness (g� 14)�
Please note:
The grind coarseness dial must only be turned while the grinder
is in operation�
If the coee is delivered too slowly or
not at all, turn one click clockwise�
For fuller bodied coee with more
crema, turn one click anticlockwise
(do not turn more than one click at
a time otherwise the coee could be
delivered in drops)�
These adjustments will only be evident after at least 2 cups of
coee have been delivered�
If this adjustment does not obtain the desired result, turn the
dial another click�
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1� With the appliance turned o but with the main power
switch pressed down (g� 3), press the button and
hold it down until the indicators on the control panel
comeon;
2� Press the button to select the required
temperature:
LOW HIGH
3� Press the button to conrm the selection� The
indicators will go o�
Tips for a hotter coee
For hotter coee, you should:
• before delivering the coee, perform a rinse cycle by
pressing the dbutton� Hot water is delivered
from the spout, heating the internal circuits of the
applianceandthusraisingthecoeetemperature;
• warmthecupsbyrinsingthemwithhotwater(usingthe
hot water function)�
• set a hotter coee temperature (see section on “Setting
the temperature”)�
Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the grinder and damage it�

DeLonghi ECAM 23 Specifications

General

Brand	DeLonghi
Model	ECAM 23
Category	Coffee Maker
Language	English