Delta AS08AD-C User Manual

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A
11-45
1
1
11.4.10.3. Baud Rate Setting of When AS01DNET-A is in Slave Mode
1. Opening the DeviceNet Builder software, the following window appears.
2. Selecting Setup>> Communication Setting, the following dialog box appears. Select the driver for connection of
AS PLC and PC as below. Click OK to finish the selection of Driver.

Delta AS08AD-C Specifications

General

Brand	Delta
Model	AS08AD-C
Category	Network Hardware
Language	English