Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
11
3.2.4 Restrictions of Jig
Punch dimensions and recommended jig designs are provided in the preceding three sections.
Extended descriptions and precautions are provided hereunder. See the table below:
Item Description
Jig weight (Payload)
For the weight limits, please follow those shown in the catalog [front-
end load requirements of the spindle]. When the limits are exceeded,
it will result in the spindle moving downwards due to gravity upon
shutdown.
Center of the jig
The jig must be designed to overlap the core of the spindle.
Otherwise, the partial load phenomenon will damage the loaded
elements.
To Next Page
Loading...
Need help?
General
