Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
3
1.2 Safety Information During Use
Item Description
Equipment Surroundings
and Operation
Please confirm there are if items interfering with punching and
pressing in the surroundings of the equipment.
While the Equipment is
Active
While the equipment is active, do not enter the scope of operation of
the equipment.
While the equipment is active, if there are any unusual sounds or burnt
odors, stop the equipment right away and notify the Company (Delta
Electronics) or the contract service provider.
1.3 Safety Information During Maintenance and Under Other
Circumstances
Item Description
Equipment Operation
Make sure that the main power is off during checks and while oil is
being applied.
While the Equipment is
Active
While the equipment is being checked, do not reach into the scope
of operation of the equipment.
1.4 Powering System
Power Specifications Model
AC single-phase three-wire
220V 50/60Hz, 10A
AM-ESP-E001-XXXX
AM-ESP-E002-XXXX
AM-ESP-E005-XXXX
AC three-phase four-wire
220V 50/60Hz, 30A
AM-ESP-E050-XXXX
To Next Page
Loading...
Need help?
General
