Delta E Series Installation And Maintenance Instructions

Delta Electronics Servo Press E-Series Installation and Maintenance Instructions
8
3.2 Loading and Unloading Spindle Punch
Recommended punch jig design is provided in this section to facilitate realistic application by users.
3.2.1 AM-ESP-E050-XXXX / AM-ESP-E030-XXXX models
Please use M16x1.5 threads for the punch jig design.
Caution: The top of the spindle punch is installed with the load cell. Do not assemble tools in a way
that could result in deviations or impacts.

Delta E Series Specifications

General

Brand	Delta
Model	E Series
Category	Inverter
Language	English