Delta E Series Software Instructions

Recipe Setting Software Instruction
6
3. Please check the On/Off status, and touch [OFF] when the servo press is [ON]. Only in the OFF
status user can modify the pressing parameter.
4. Please save the recipe in PLC. If user want to operate with the HMI in the future, changing the
saving path to the HMI is required and don’t use this software anymore.

Delta E Series Specifications

General

Series	E Series
Type	Inverter
Frequency	50 Hz / 60 Hz
Protection Features	Over voltage, Over current, Short circuit, Over temperature
Dimensions	Varies by model
Weight	Varies by model
Storage Temperature	-40°C ~ +70°C