Chapter 7 Optional AccessoriesME300
7-73
Warning Codes
LCM Display * Description Corrective Actions
CE01
Comm Command Er
Warning
Modbus function code error
Motor drive does not accept the communication
command from the keypad.
1. Verify that the keypad is properly connected to the
motor drive by a communication cable such as
RJ45.
2. Press RESET to clear the errors.
If none of the above solutions work, contact your local
authorized dealer for assistance.
CE02
Comm Address Er
Warning
Modbus data address error
Motor drive does not accept keypad’s communication
address.
1. Verify that the keypad is properly connected to the
motor drive by a communication cable such as
RJ45.
2. Press RESET to clear the errors.
If none of the above solutions work, contact your local
authorized dealer for assistance.
CE03
Comm Data Error
Warning
Modbus data value error
Motor drive does not accept the communication data
from the keypad.
1. Verify that the keypad is properly connected to the
motor drive by a communication cable such as
RJ45.
2. Press RESET to clear the errors.
If none of the above solutions work, contact your local
authorized dealer for assistance.
CE04
Comm Slave Error
Warning
Modbus slave drive error
Motor drive cannot process the communication
command from the keypad.
1. Verify that the keypad is properly connected to the
motor drive by a communication cable such as
RJ45.
2. Press RESET to clear the errors.
3. Shut down the system, wait for ten minutes, and
then restart the system.
If none of the above solutions work, contact your local
authorized dealer for assistance.
CE10
KpdComm Time Out
Warning
Modbus transmission time-out
Motor drive does not respond to the communication
command from the keypad.
1. Verify that the keypad is properly connected to the
motor drive by a communication cable such as
RJ45.
2. Press RESET to clear the errors.
3. Shut down the system, wait for ten minutes, and
then restart the system.
If none of the above solutions work, contact your local
authorized dealer for assistance.
TPNO
TP No Object
Warning
Object not supported by
TPEditor
Keypad’s TPEditor uses an unsupported object or
Drive series.
1. Verify that the TPEditor is not using an unsupported
object or setting. Delete unsupported objects and
unsupported settings.
2. Re-edit the object in the TPEditor and then
download it to the keypad.
3. Make sure the Drive series support the TP
functions. If it does not, the main screen displays
the default.
If none of the above solutions work, contact your local
authorized dealer for assistance.
NOTE
The warning code CExx only occurs when the communication problem is between the drive
and the keypad. It has nothing to do with the drive and other devices. Note the warning code
description to find the cause of the error if CExx appears.
To Next Page
Loading...
Need help?
General