Bluetooth operation
You can enjoy listening to music wirelessly by connecting the earphones to your Bluetooth device.
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to the earphones. When using Bluetooth for the first time,
you need to pair the earphones and your Bluetooth device so they can
communicate with each other. Once a Bluetooth device has been paired
with your earphones, pairing does not need to be performed again for
future Bluetooth connections with that device.
0
Pairing needs to be done again in the following cases.
0
When 9 or more devices have been paired with the earphones
These earphones can store pairing information from a maximum of 8 devices.
When 9 or more devices are paired, the new pairing information overwrites the
oldest pairing information in order from the oldest information onwards.
0
Multiple Bluetooth devices cannot be played back at the same time.
Connecting
There are three methods for connecting with Bluetooth devices:
1
Connecting to the earphones for the first time
(v p. 17)
2
Pairing with other Bluetooth devices
(v p. 19)
3
Changing the Bluetooth device connected to
the earphones (v p. 22)
Contents Preparation Connections Operation Troubleshooting Appendix
16
To Next Page
Loading...
Need help?
General
Weight and Dimensions
