4
Playing back music on the Bluetooth device.
Music played back on the connected Bluetooth device is output from
the earphones.
NOTE
0
Before playing music, check the volume setting of the used Bluetooth
device and enjoy it at the appropriate volume. Volume operation cannot be
performed with the earphones.
0
If you put the earphones in the charging case and open the lid of the
charging case again, earphones automatically connects to the last
Bluetooth device that was connected.
0
The earphones pairing mode is canceled if pairing is not completed within 2
minutes. In this case, if the lid of the charging case is opened after closing it, the
earphones perform a pairing again.
0
If the status LED does not flash in white even when you open the lid of the
charging case, the earphones are not in the pairing mode. With the lid of the
charging case left open, long press the multi-function button on the back of the
charging case for approximately 2 seconds to switch to the pairing mode.
.
0
If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).
Contents
Preparation Connections Operation Troubleshooting Appendix
18
To Next Page
Loading...
Need help?
General
Weight and Dimensions
