3
Select “DENON AH-GC25W” from the list of devices
displayed on the screen of your Bluetooth device.
When pairing is completed and the Bluetooth connection is
established, the Bluetooth LED lights for approximately 5 seconds.
.
4
Playing back music on the Bluetooth device.
Music played back on the connected Bluetooth device is output from
the headphones.
0
If the power is on, press and hold the 1/3 button for approximately 3 seconds to
turn the power off before pairing.
0
The headphones pairing mode is canceled if pairing is not completed within 3
minutes. In this case, press and hold the 1/3 button for approximately 3 seconds
to turn the power off and then pair the devices again.
0
If you are requested to enter a PIN code (pass key), enter “0000” (four zeros).
Contents Preparation Connections Operation Troubleshooting Appendix
15
To Next Page
Loading...
Need help?
General
