1: Connecting to the headphones for
the first time
Check that the headphones are not connected to any Bluetooth device
before pairing.
1
Turn on the Bluetooth function of your Bluetooth
device.
0
For details, see the Owner’s Manual of the Bluetooth device that
you want to connect.
.
2
While the power is off, press and hold the 1/3 button
for approximately 4 seconds.
The Bluetooth LED lights and then blinks in approximately 1-second
intervals as the headphones enter pairing mode.
.
0
The headphones turn on after pressing and holding the 1/3 button for
approximately 2 second. Continue pressing the button.
0
If the Bluetooth LED does not light even when the 1/3 button is pressed,
the rechargeable battery has no power remaining. Charge the battery.
(v p. 8)
Contents
Preparation Connections Operation Troubleshooting Appendix
14
To Next Page
Loading...
Need help?
General
