21
ENGLISH
Advanced versionSimple version InformationBasic version
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage22)
n Playing a CD player (vpage22)
n Playing an iPod
®
(vpage22)
n Tuning in radio stations (vpage25)
n Playing a USB memory device (vpage27)
Selecting a listening mode (Surround mode)
(vpage28)
n Selecting the input source (vpage21)
n Adjusting the master volume (vpage21)
n Turning off the sound temporarily (vpage21)
Playback (Advanced operation) (vpage38)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
3UHVV WKH LQSXW VRXUFH VHOHFW EXWWRQ
NET/USB iPod DVD BD TUNER
DOCKSAT/CBLGAMEV.AUXCD
DVR
TVWREHSOD\HGEDFN
The desired input source can be selected
directly.
• When iPod PLAY is pressed, the input source of this unit is
switched to “DOCK” or “USB/iPod” and the connected iPod is
automatically played (vpage25 “iPod play function”).
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
q Press SOURCE SELECT.
Display the “Source Select” menu.
6RXUFH6HOHFW6$7&%/
5HFHQW6RXUFH
(QWHU
6HOHFW
(17(5
The currently selected input
source is highlighted.
q
w
e
q Input Source
The name of the highlighted input
source is displayed.
w Recently used sources
The recently used input sources (up to
five) are displayed.
e Icons for the input sources in the
different categories are displayed.
w Use uio p to select the input source, then press ENTER.
The input source is set and the source selection menu is turned
off.
• When using with an iPod connected directly to the USB port of this
unit, select “USB/iPod” for the input source.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” (vpage62).
• To turn off the source selection menu without selecting an input
source, press
SOURCE SELECT again.
n Using the knob on the main unit
Turn SOURCE SELECT.
• Turning
SOURCE SELECT switches the input
source, as shown below.
BD DVD TV SAT/CBL GAMEDVR
V
.AUXUSB/iPod DOCKHD RadioCD
Adjusting the master volume
8VHVOL dfWRDGMXVWWKHYROXPH
n When the “Volume Display” setting
(vpage62) is “Relative”
GAdjustable rangeH
– – –
–80.5dB – 18.0dB
n When the “Volume Display” setting (vpage62) is
“Absolute”
GAdjustable rangeH
0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
Turn
MASTER VOLUME to adjust the
volume.
Turning off the sound temporarily
3UHVVMUTE
• The sound is reduced to the level set at “Mute Level” (vpage62).
• To cancel, press
MUTE again. Muting can also be canceled by
adjusting the master volume.