100
Web control function
You can control this unit from a web control screen on a web browser.
•This unit and the PC need to be connected to the network properly
(vpage 27 “Connecting to a home network (LAN)”) in order to
use the web control function.
•Depending on the settings of your security-related software, you
may not be able to access this unit from your PC. If this is the case,
then change the settings of the security-related software.
1
Switch the “IP Control” setting to “Always On”
(vpage 136).
2
Check the IP address of this unit with “Information”
(vpage 136).
Network/Network Information
Friendly name
DHCP
IP Address
MAC Address
Displays the current network name of the AVR
DENON AVR-3313CI
On
192.168.100.19
0005cd000000
Checking the IP address.
3
Start up the web browser.
4
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.100.19”,
enter “http://192.168.100.19/”.
http://192.168.100.19/index.asp
INDEX
File
Edit View Tools HelpFavorites
DENON AVR-3313CI
Web Controller
MAIN ZONE
40.0
CBL/SAT
ZONE2
ZONE3
20
Blu-ray
CBL/SAT
q
q Entering the IP address.
•By adding this unit’s IP address to the browser’s bookmark, you
can display the web control screen using the bookmark function
the next time you use the browser. If you are using a DHCP server
and “IP Control” (vpage136) is set to “Off In Standby”, turning
the power on/off changes the IP address.
5
When the top menu is displayed, click on the menu
item you want to operate.
http://192.168.100.19/index.asp
INDEX
File
Edit View Tools HelpFavorites
DENON AVR-3313CI
Web Controller
Web Controller Config.
MAIN ZONE
40.0
CBL/SAT
Setup Menu
ZONE2
ZONE3
20
Blu-ray
CBL/SAT
w
e
r
w Click when you select the zone to operate. (vGExample 1H)
e Click when you operate the setup menu.
r Click to change the Web control screen setting. (vGExample
3H)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
