21
Connecting an iPod or USB memory device to the iPod/USB port
•You can enjoy music stored on an iPod or USB memory device.
•For operating instructions see “Playing an iPod” (vpage 39) or “Playing a USB memory device”
(vpage42).
Cables used for connections
To connect an iPod to this unit, use the USB cable supplied with the iPod.
REC SOURCE
SOURCE SELECT
STATUS
INFO
BACK
PHONES
ZONE 2
SOURCE SELECT
ZONE 3
ON/OFF ON/OFF
USB memory
device
iPod
or
DENON does not guarantee that all USB memory devices will operate or receive power. When using a
portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power,
use the AC adapter.
NOTE
•USB memory devices will not work via a USB hub.
•It is not possible to use this unit by connecting the unit’s iPod/USB port to a PC via a USB cable.
•Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.
•When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone
is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this
device.
•If the iPod is connected using an iPod cable (commercially available) that is longer than 6.6 ft (2 m), sound
may not be played correctly. In this case, use a genuine iPod cable, or a cable that is shorter than 3.3 ft
(1 m).
Connecting an HDMI-incompatible device
Supported iPod models
•iPod classic
•iPod nano
•iPod touch
•iPhone
(as of April 2012)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
