Playback in ZONE2 (Another room)
You can operate this unit to enjoy audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE).
You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE
and ZONE2.
If the input for ZONE2 is set to “Source”, both digital and analog connected devices can be listened to from ZONE2.
If the input for ZONE2 is set to a specific source (like CBL/SAT), only connected analog devices can be listened to from ZONE2.
Connecting ZONE2
You can use the following two methods to play back audio in ZONE2.
0
“Connecting using a speaker output terminal” (v p. 143)
0
“Connecting using an external amplifier” (v p. 144)
o
Connection 1: Connecting using a speaker
output terminal
When “Assign Mode” is set to “ZONE2” in the menu, ZONE2 audio is
output from the SURROUND BACK speaker terminal. (v p. 193)
.
(L)
MAIN ZONE
ZONE2
This unit
(R)
Contents
Connections Playback Settings Tips Appendix
143
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
