Screen Saver
Select the screen saver setting.
A screen saver is activated if no operation is performed for more than 5
minutes when no video signal is input or when the same screen (e.g. the
setup menu) is displayed.
Use uio p to clear the screen saver.
On: Turns screen saver on.
Off
(Default):
Turns screen saver off.
0
The screen saver is activated in the following cases.
0
When the setup menu is displayed
0
When no video signal is input
0
When the network, USB, Bluetooth or Tuner playback screen is displayed
0
This feature will be supported via firmware update.
4K/8K Signal Format
Set the format of 4K and 8K signal to be played back by this unit when the
TV or playback device connected to this unit is HDMI 4K or 8K signal
compatible.
o
4K/8K Signal Format
Set the format of 4K and 8K signal played back by this unit.
Standard:
Select if your TV and playback devices
support 4K 60p 4:2:0 8 bit video signals.
Enhanced
(Default):
Select if your TV, playback devices, and
cables support high quality 4K 60p 4:4:4
8 bit, 4:2:2 or 4:2:0 10 bit video signals.
8K Enhanced:
Select if your TV, playback devices, and
cables support high quality 8K 60p or 4K
120p video signals.
Contents Connections Playback Settings Tips Appendix
176
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
