Denon AVR-X4400H Manual

Video conversion function
This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
0
The MAIN ZONE Video Conversion
function is compatible with the following
formats: NTSC, PAL, SECAM, NTSC4.43,
PAL-N, PAL-M and PAL-60.
0
When component video signals are used,
only 480i and 576i signals are converted to
HDMI signals.
HDMI-compatible TV
Output
(MONITOR OUT)
Input (IN)
Video signal Video signal
Component
video signal
HDMI signal
Output
Video device
This unit
HDMI-incompatible TV
HDMI signal
HDMI connector HDMI connector HDMI connector HDMI connector
Component
video signal
Component video
connectors
Component
video connectors
Component video
connectors
Component video
connectors
Video connector Video connector Video connector Video connector
Contents Connections Playback Settings Tips Appendix
291
Front panel Display Rear panel Remote Index

Denon AVR-X4400H Specifications

General

Display	-
ECO mode	Yes
HDCP version	2.2
Apple docking	No
Product color	Black
Audio decoders	DTS:X, Dolby Atmos
Audio formats supported	ALAC, DSD, FLAC, WAV
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Supported graphics resolutions	4096 x 2160
RS-232 ports	1
Connectivity technology	Wireless
HDMI in	8
Composite video in	4
Component video (YPbPr/YCbCr) in	2
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out channels	11.2
Input sensitivity	200 mV
Audio output channels	9.2 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	200 W
Power output per channel (20-20KHz@8 Ohm)	125 W
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	710 W
Number of HDMI outputs	3

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	13500 g