EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-X4400H

Denon AVR-X4400H Manual

Denon AVR-X4400H
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #153 background imageLoading...
Page #153 background image
o
Bluetooth section
Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate)
Transmission power: Bluetooth Specification Power Class 1
Maximum communication range:
Approx. 98.4 ft/30 m in line of sight
z
2
Used frequency range: 2.4 GHz
Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.5
Corresponding codec: SBC
Transmission range (A2DP): 20 Hz – 20,000 Hz
z2
The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
o
General
Power supply: AC 120 V, 60 Hz
Power consumption: 710 W
Power consumption in standby mode:
0.1 W
z
Power consumption in CEC standby
mode:
0.5 W
z When “Network Control” in the menu is set to “Off In Standby” and “HDMI Pass Through” is set to “Off”.
For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips Appendix
321
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X4400H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X4400H and is the answer not in the manual?

Denon AVR-X4400H Specifications

General IconGeneral
Display-
ECO modeYes
HDCP version2.2
Apple dockingNo
Product colorBlack
Audio decodersDTS:X, Dolby Atmos
Audio formats supportedALAC, DSD, FLAC, WAV
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Supported graphics resolutions4096 x 2160
RS-232 ports1
Connectivity technologyWireless
HDMI in8
Composite video in4
Component video (YPbPr/YCbCr) in2
Receiver typeSurround
Frequency range10 - 100000 Hz
Pre-out channels11.2
Input sensitivity200 mV
Audio output channels9.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)200 W
Power output per channel (20-20KHz@8 Ohm)125 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)710 W
Number of HDMI outputs3
Weight and Dimensions IconWeight and Dimensions
Depth389 mm
Width434 mm
Height167 mm
Weight13500 g

Related product manuals