Denon AVR-X520BT Service Manual

20
SPECIAL MODE (AVR-X520BT / X518CI)
Special mode setting button
b
 No.1,2:HolddownbuttonsAandBatthesametimeandpressthepowerbutton(
X
)
toturnonthepower.
 No.3,4:HolddownbuttonsA,BandCforatleast3secondswhilethepowerison.
Mode Button A Button B Button C Contents
1 Initialization PRESET+ TUNE+
Backupdatainitializationiscarriedout.
(Seepage14.)
2 VersionDisplay TUNE+ DIMMER
FirmwareversionssuchasMain,DSPorOSD
aredisplayedintheFLdisplay.Errorsare
displayedorwhentheyoccur.
(Seepage21.)
3
ChangeVideoFormat
andDisplayLanguge
TUNE- TUNE+ DIMMER
Selectthemodeshownbelow.
"VideoFormat"and"Language".
3-1 VideoFormat PRESET+ ー ー
Selectorchangethe"NTSC"or"PAL".
Defaultsetting:E2/E1CPAL,E3NTSC
3-2 Language ↑ ー ー
Selectorchangethelanguage:
AVR-X520E2"ENGLISH","SPANISH""FRENCH"
AVR-X520/X518E1C"CHINESE","ENGLISH
Defaultsetting:E3/E2ENGLISH,E1CCHINESE
4 ProductMode PRESET+ TUNE- TUNE+
Selectthemodeshownbelow.
"RemoteLock","TuningStepChange","OSD
Update","ProtectionHistoryDisplay"and"Mic
Mode".
4-1 RemoteLock STATUS+ ー ー
Modetoprohibittheoperationfromthe
remotecontrol.
4-2 TuningStepChange ↑ ー ー
SwitchingoftheStepofthetuningfrequency
oftheTuner.
4-3 OSDUpdate ↑ ー ー
PowerforcedmodetoupdatetheOSDash
ROM.
*Notforservice.
4-4
ProtectionHistory
Display
↑ ー ー Displayofprotectionofoccurrencehistory.
4-5 MicMode ↑ ー ー
Modethatconnectstheinputofthe
microphoneterminaltoSpeakeroutput.
*Notforservice.
MASTER VOLUME
SOURCE SELECT
SETUP MICPHONES
5V/1A
GAMECBL/SAT
31
DIMMER STATU S
TUNER
PRESET CH
TUNE
DVD/Blu-ray
2
Bluetooth
4
QUICK SELECT
TUNE -, +
X
PRESET +
DIMMER
f
f

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g