Denon DCD-710AE Service Manual

72
DCD-710AE
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts marked with this symbol
z
have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the unit to the customer, make sure you
make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps,
or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is
located and corrected.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM
M=1,000,000 OHM
ALL CAPACITANCE VALUES IN MICRO FARAD.
P=MICRO-MICRO FARAD
EACH VOLTAGE AND CURRENT ARE MEASURED AT
NO SIGNAL INPUT CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE
WITHOUT PRIOR NOTICE.

Denon DCD-710AE Specifications

General

Audio system	stereo
Audio formats supported	MP3, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.0025 %
CD-RW playback	Yes
Playback disc formats	CD audio
CD changer	No
Device type	HiFi CD player
Product color	Silver
Disc playback modes	Programming
Number of optical discs	1 discs
Display type	VFD
Volume control	Digital
Programmable tracks	25
Headphone connectivity	6.3 mm
USB 2.0 ports quantity	1
Power requirements	230V AC, 50Hz
Power consumption (typical)	22 W

Weight and Dimensions

Depth	279 mm
Width	434 mm
Height	107 mm
Weight	4200 g