29
SURROUND MODES AND PARAMETERS
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”.
Surround mode)
Channel output Audio Adjust
Front L/R Center Surround L/R Surround Back L/R Subwoofer Mode
D. Comp z3 DRC z4 LFE z5
DIRECT (2channel)
S D
z2
S S
DIRECT (Multi-channel)
S D D D
z1
D S S S
STEREO
S D S S S
MULTI CH IN
S D D D D S
DOLBY PRO LOGIC gx S D D D D S S S
DOLBY PRO LOGIC g S D D D S S S
DTS NEO:6
S D D D D S S S
DOLBY DIGITAL
S D D D D S S
DOLBY DIGITAL Plus
S D D D D S S
DOLBY TrueHD
S D D D D S
DTS SURROUND
S D D D D S S
DTS 96/24
S D D D D S S
DTS-HD
S D D D D S S
DTS Express
S D D D D S S
MULTI CH STEREO
S D D D D S S
VIRTUAL
S D
z2
S S
z1 A signal for each channel contained in an input signal is output as audio.
z2 Only when “SW Mode” is set to “LFE+Main” (“Bass Setting”), sound is output from the subwoofer.
z3 This item can be selected when a Dolby Digital or DTS signal is played.
z4 This item can be selected when a Dolby TrueHD signal is played.
z5 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
