ENGLISH
22
11
PROGRAMMED PLAYBACK
★ Use this function to program the tracks to play in a certain order.
★ Up to 25 tracks per disc can be programmed.
★ Programs for up to six discs can be stored in the permanent memory.
Inputting programs
1
2
3
4
5
6
7
Set the program operation selection mode.
Press the PROGRAM button.
Select “Program In?”.
Turn the data master knob (
8—9).
Set the program input mode.
Press the data master knob (8—9).
Select the track you want to program.
Turn the data master knob (8—9).
Program the selected track.
Press the data master knob (
8—9).
To program other tracks, repeat steps 3 to 5.
✽ “Program Full” appears on the character display if you
attempt to program a 26th track.
[Canceling the program input mode]
Press the PROGRAM button.
• If no program has been input, the player returns to the
normal status.
• If a program has been input, the player returns to the
program operation selection mode. (The player returns to
the same status as in step 11.)
• If the PROGRAM button is pressed again, the player
returns to the normal status.
[Example: When track 3 is selected]
Changing programs
8-1
8-2
9-1
9-2
10
-
1
10
-
2
[Changing programmed tracks]
Select the program step number you want to change.
Turn the data master knob (8—9).
Set the program step number to be changed.
Press the data master knob (8—9).
[Inserting tracks in a program]
Select the program step number where you want to
insert a track.
Turn the data master knob (
8—9).
Set the program insert mode.
Press the PITCH BEND + button.
[Clearing a programmed track]
Select the program step number you want to delete.
Turn the data master knob (
8—9).
Clear the step from the program.
Press the PITCH BEND – button.
• The player is set to the same status as in step 4 and an
additional track can be selected.
• The player is set to the same status as in step 4 and a
new track can be selected.
To Next Page
Loading...
Need help?
General
