In
Setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode (refer to pages 23-25) are aV9ilable.
QUICK mode consists of the setting menus frequently used, and they are accompanied with
QUICK
mark.
You
can make all settings in CUSTOM mode.
TVrfPE
NTSC
'"
~
I
~li]
~,~{a
ffiOG.104ODE
lAUTO!
"'"'"
,",'0
• AUTO: Automatically selects the best resolution setting
(FRAME or FIELD) based on the data character-
istics of the pictures.
o FIELD: Select FIELD when the pictures are still unstable
even if AUTO is selected. FIELD stabilizes the
pictures, although the picture quality may
become coarse due to the limited amount of
data.
o FRAME: Select FRAME to display relatively motionless pic-
tures
in
higher resolution. FRAME improves the
picture quality, although
it
may unstabilize the pic-
tures due
to
simultaneous output of two field data.
TV
TYPE
(Default:
MULTI)
• Press the Cursor buttons
(A
or
T)
to select a setting, then press the
ENTER button.
o Select a video system setting
between MULTI, NTSC and
PAL.
o NTSC: Select this when your TV's
video format
is
NTSC. If NTSC
is
selectEd, output
format
is
fixed to NTSC.
o
PAL:
Select this when your TV's video format is
PAL.
If
PAL
is
selected, output format
is
fixed to
PAL.
o MULTI: Automatically selects
the
suitable video out system
(PALINTSC)
according
to
the format
of
the inserted disc.
- For the discs recorded with NTSC system, the NTSC sig-
nal will be output and pictures of the discs can be viewed
on
an NTSC or Multi system
TV.
- For the discs recorded with
PAL
system, the
PAL
signal
will be output and pictures of the discs can be viewed on
a
PAL
system
TV.
NOTE:
o If the
AC
power cord
is
disconnected while the unit
is
turned on, the video format of opening screen is altered.
To
keep the format, turn the unit off before unplugging the AC
power cord.
PROGRESSIVE
(Default:
OFF)
QUICK
o
Press
the
Cursor buttons (A
or
T)
~------~
for
set
PROGRESSIVE
to
ON
or
I
=~~
y~.
OFF,
then
press
the
ENTER
button.
• The setting will be effective when
E~E>c~
~rR80~
you exit the setup screen by
'::GG'J:5g;'"
,z-;:o,
pressing SETUP.
~g~:~~i~:E
~g~~L
o
When
PROGRESSIVE
is
ON,
P.SCAN
appears
on
the
DVD
player's
display
after
you
exit
the
setup
screen.
o Refer
to
page
11
for more details.
PROG.MODE
(Default:
AUT01)
o Press the
Cursor
buttons
(A
or
T)
to select a setting (AUTO1,
AUT02, or VIDEO), then press the
ENTER button.
o For HDMI or Component Video
connection, this function allows
you to select the image output,
depending
on
the base material (video or film) of the
recorded DVD images, when PROGRESSIVE
is
ON.
o AUT01: Automatically selects the best image output
(AUT02 or VIDEO) based on the information of
data stream.
o AUT02: A combination of the top and bottom fields is
output as one-frame image.
o VIDEO: Either of top or bottom field
is
output for one-frame
image.
I
ORIGINAL
0"
ENGLISH
ENGLISIol
i::%
I
FRAME
I
=~:
;~/=
<4:3
LETTER
• 3
f¥.N
&
SCAN
169W1OE
"3S00EEZE
I
~
~:.c"=
.
fJlITV:AS:I'E~c,~,~m~m:"",,~
Iq:Tlll
MODE
AUTO
TV
TYPE
MULTI
PROGRESSIVE
OFF
PROG,MODE AUTOI
I1DMISELECT YCtlC,
HOMI
PICTURE NOAMAL
I
IDlALOG
"BOHL'
DlSCMENU
OSO
-<
Display Setting
>-
You
can
change
certain
aspects
of
the
DVD
display
screens,
still
mode
setting, Progressive
and
HDMI
settings.
D
Press
the
SETUP
button in
stop
mode.
f)
Press
the
Cursor
buttons (
.....
or
~)
to
select
CUSTOM,
then
press
the
ENTER
button.
o
The
custom
mode
will appear.
~
Press the
Cursor
buttons (
.....
or~)
to
select DISPLAY, then press the
ENTER button to confirm.
D
Press
the
Cursor
buttons (A
or
T)
to
select
an item, then press
the
ENTER
button.
TV ASPECT
(Default:
4:3 LETTER BOX) QUICK
•
Press
the
Cursor
buttons
(A
or
T)
for
an
item selection;
then
press
the
ENTER
button.
o
Select
4:3
LEDER
BOX
for a
black
bars
appears
on
top
and
bottom
of
the
screen.
•
Select
4:3
PAN &
SCAN
for a full
height
picture with
both
sides
trimmed.
o Select 16:9
WIDE
if a wide-screen
TV
is connected to the
DVD player.
• Select
4:3
SQUEEZE
when
the
TV
screen
is
too
large hor-
izontally
at
16:9
WIDE
setting
and
when
it is
impossible
to
adjust
the
screen
size using
the
TV's
controls.
STILL
MODE
(Default:
AUTO)
• Press the
Cursor
buttons (A or
T)
for an item selection (AUTO,
FIELD, or FRAME), then press the
ENTER button.
• This function allows you to adjust
picture resolution and quality
in
still mode.
o An individual picture on TV screen
is
called as "frame",
which consists of two separate images called as "field".
Some pictures may be blurred at the AUTO setting
in
still
mode due to their data characteristics.
-<
Language Setting
Language options are not available with some discs.
D
Press
the
SETUP
button in
stop
mode.
f)
Press
the
Cursor
buttons (
.....
or
~)
to
select
CUSTOM,
then press
the
ENTER
button.
o The custom mode will appear.
~
Press
the
Cursor
buttons (
.....
or
~)
to
select
LANGUAGE,
then
press
the
ENTER
button
to
confirm.
D
Press
the
Cursor
buttons
(A
or
T)
to
select
an item,
then
press
the
ENTER
button.
DIALOG
(Default:
ORIGINAL)
o Sets the audio language.
SUBTITLE
(Default:
OFF)
o Sets the subtitle language.
DISC
MENU
(Default:
ENGLISH)
o Sets the language for DVD Menu.
OSD
(Default:
ENGLISH)
~OltjJ~
o Sets the language for the On-Screen display.
~
Press
the
Cursor
buttons
(A
or
T)
to
select
a setting,
then
press
the
ENTER
button.
o If OTHER is selected
in
the DIALOG, SUBTITLE or DISC
MENU, press four-digit number to enter the code for the de-
sired language (refer to the language code list on page 25).
• Only the languages supported by the disc can be selected.
(;J
Press
the
SETUP
button
to
exit
and
activate
the
new
set-
tings.
NOTE:
o Language Setting for DIALOG and SUBTITLE may not be
available with some discs. Then use the AUDIO and
SUBTITLE buttons. Details are
on
page 21.
-23-
EN
To Next Page
Loading...
Need help?
Video Outputs
