Denon Heos 7 User Manual

Advanced Speaker Settings
Caution
Adjusting these settings may disconnect your speaker from your network
and possibly render your speaker unusable. Do not use these features
unless you are comfortable making advanced adjustments to your
speaker.
o
Network Settings
1
Select “Advanced”.
2
Select “NETWORK SETTINGS” tab.
3
Scroll down to see all of the options for
a. Network Interface (Ethernet or Wireless)
b. Wireless Settings
c. IP Address Settings (Automatic or Manual)
d. Wireless Power Saving
4
Select Save Settings to apply the new settings or
Cancel Changes to revert to the previous settings.
o
About Wireless Power Saving
The Wireless Power Savings feature saves power by turning off power to
the wireless radio inside the HEOS device when the device is connected
to an Ethernet network. If you disconnect the Ethernet cable from the
HEOS device, Wireless Power Saving will automatically turn off and the
wireless radio will turn on so that the HEOS device can be discovered over
your wireless network.
NOTE
0
If Wireless Power Savings is ON, Wi-Fi power will be temporarily turned on when
accessing the My Devices/(My Devices)/Network screen in the HEOS app or
whenever the Connect button on the device is pressed.
Contents Setup Use Troubleshooting Status LED Appendix
39

Denon Heos 7 Specifications

General

RMS rated power	- W
Audio output channels	- channels
Bluetooth	Yes
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	1
Apple Lightning docking connector	-
USB connector type	USB Type-A
Product color	White
Volume control	Digital
AC input voltage	100 - 240 V
Power source type	AC

Weight and Dimensions

Depth	479 mm
Width	203 mm
Height	164 mm