Denon Heos Drive User Manual

ADDING MORE HEOS DEVICES
The HEOS multi-room sound system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices
so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 devices to your HEOS system.
NOTE
0
Each HEOS Drive contains four HEOS modules and therefore always counts as four devices towards the maximum number of 32 HEOS devices supported on any one
network. Up to 8 HEOS Drive devices are supported on a single network.
Adding Wired HEOS Devices
Just connect the HEOS devices to your home network using an Ethernet cable and the HEOS devices will appear on your HEOS app as a new room in
the Rooms screen.
At your convenience, you can assign a name to the HEOS devices to indicate which room you have it placed in.
0
Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended).
0
Do not connect a Network Connector directly to the LAN port/Ethernet connector on your computer.
Contents Setup Use Troubleshooting Status LED Appendix
Setup
21

Denon Heos Drive Specifications

General

Audio decoders	Dolby Digital, Dolby Digital Plus
Amplifier class	D
Audio output channels	7.1 channels
Peak power per channel	60 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.05 %
Pre out port	Yes
USB 2.0 ports quantity	4
Speakers connectivity type	-
Purpose	Home
Product color	Black
Cables included	AC, LAN (RJ-45)
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	402 mm
Width	430 mm
Height	88 mm
Weight	7200 g