Denon Heos Drive User Manual

POWER MANAGEMENT
Power Modes
o
Quick Start Mode
To save power, the device will automatically enter “Quick Start Mode”
whenever there is no network access or playback for 20 minutes and
will automatically resume to full power whenever the device is selected
and playing music.
Also push Power button, the device enter Quick Start Mode.
When all zone enter Quick Start Mode, Power indicator will be red.
o
Deep Standby
The device also has the ability to automatically enter “Deep Standby”
whenever the wired network connection is removed for more than 60
minutes in Quick Start Mode. Power indicator will turn off during Deep
Standby. To “wake” a HEOS device from Deep Standby, you must
press the standby button which will immediately turn on Power
indicator.
Power button for more than 6 seconds, the device enter Deep
Standby.
o
Off
To completely turn off the power to the device you must switch to OFF
of power switch on rear panel.
Contents
Setup Use Troubleshooting Status LED Appendix
46

Denon Heos Drive Specifications

General

Audio decoders	Dolby Digital, Dolby Digital Plus
Amplifier class	D
Audio output channels	7.1 channels
Peak power per channel	60 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	0.05 %
Pre out port	Yes
USB 2.0 ports quantity	4
Speakers connectivity type	-
Purpose	Home
Product color	Black
Cables included	AC, LAN (RJ-45)
Connectivity technology	Wired
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	402 mm
Width	430 mm
Height	88 mm
Weight	7200 g