EasyManuals Logo
Home>DeWalt>Nail Gun>DCN691

DeWalt DCN691 User Manual

DeWalt DCN691
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
English
12
OPERATION
WARNING: To
reduce the risk of
serious personal
injury, turn unit off and
remove the battery
pack before making any
adjustments or
removing/ installing
attachments or
accessories. An
accidental start-up
can cause injury.
WARNING: Read the
section titled Nailer
Safety Warnings at
the beginning of this
manual. Always wear
eye and ear protection
when operating this
tool. Keep the nailer
pointed away from
yourself and others. For
safe operation, complete
the following
procedures and
checks before each use
of the nailer.
WARNING: If the tool
has been dropped or you
suspect tool damage
perform tool operation
check as defined in the
Mode Selection section
of the manual. If it
doesn’t perform
according to the
manual, stop using the
tool and have it serviced
at an authorized
DeWALT service center.
1. Wear proper eye,
hearing and
respiratory protection.
2. Remove battery pack from tool.
3. Lock the pusher in the back position and remove all nail strips from the
magazine.
4. Check for smooth and proper operation of contact trip and pusher assemblies.
Do not use tool if either assembly is not functioning properly. nEVER use a tool
that has the contact trip restrained in the up position.
5. nEVER use a tool that has damaged parts.
WARNING: To reduce the risk of personal injury, disconnect battery pack from
tool before performing maintenance, clearing a jammed nails, leaving work area,
moving tool to another location or handing the tool to another person.
Installing and Removing the Battery Pack (Fig. D)
nOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack 12 into the tool handle, align the battery pack with the
rails inside the tool’s handle and slide it into the handle until the battery pack is
firmly seated in the tool and ensure that it does not disengage. To remove the
battery pack from the tool, press the release button 15 and firmly pull the battery
pack out of the tool handle. Insert it into the charger as described in the charger
section of this manual.
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown. WARNING: To reduce the risk of
serious personal injury, ALWAYS hold securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the handle 16 as shown.

Other manuals for DeWalt DCN691

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCN691 and is the answer not in the manual?

DeWalt DCN691 Specifications

General IconGeneral
BrandDeWalt
ModelDCN691
CategoryNail Gun
LanguageEnglish

Related product manuals