English
2
1
2
3
4 Depth adjustment
wheel
5 Jam/stall indicator
light
6
7
8
WARNING: Read all
safety warnings and all
9 Mode selector switch
instructions.
Failure to follow the
warnings and
1
0
Rotating rafter/belt
hook instructions
may result in electric
shock, fire and/or
11 On-board hex
wrench
serious injury.
12WARNING: To reduce
the risk of injury, read
the
instruction manual.
1
3
14 Speed selector switch
i
f
y
o
u
h
a
v
e
a
n
y
q
uestions or comments about this or any DeWALT
tool, call us toll free at:
1-800-4-DeWALT (1-800-433-9258).
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mainsoperated (corded)
power tool or battery-operated (cordless) power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c ) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric
shock.
e ) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f ) If operating a power tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c ) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power tools with
To Next Page
Loading...
Need help?
General
