Digi CM User Manual

Inactivity timeouts
Configuring inactivity timeouts will timeout stale connections which can block new connection
attempts. The following outlines the configuration for various inactivity timeout settings on the Digi
Passport/Digi CM units.
Web server inactivity timeout
You can configure the inactivity timer for the web server.
1. Log in to the web interface on the device.
2. Select Network > Web server configuration. The Web server configuration page appears.
3. In the Login timeout field, configure the time for web server inactivity.
Serial port inactivity timeout
You can configure the inactivity timer for a serial port.
1. Log in to the web interface on the device.
2. Select Serial port > Configuration. The Web server configuration page appears.
3. Select the port number.
Digi CM and Passport Troubleshooting Guide
23

Digi CM Specifications

General

Brand	Digi
Model	CM
Category	Switch
Language	English