Digi CM User Manual

Introduction to Digi CMand Passport
Troubleshooting Guide
This guide contains troubleshooting information for common problems, and applies to the following
models:
n Digi CM (all models)
n Digi Passport (all models)
Log in to the web interface on the device
You can use the web interface to configure the firmware on the device. You are required to log in to
the web interface each time you access the interface.
1. Run the Device Discovery Utility or DPA utility.
2. Select the device from the device list.
3. Click Open web interface. A log in screen displays.
4. Enter the user name and password.
n User name: The default user name is root.
n Password: The unique, default password is printed on the device label. If a password is
not printed on the label, the password is dbps. If neither password works, the
password may have been updated. Contact your system administrator.
5. Click Sign in.
Digi CM and Passport Troubleshooting Guide
5

Digi CM Specifications

General

Brand	Digi
Model	CM
Category	Switch
Language	English