Digi Connect Wi-SP User Manual

Digi Connect and ConnectPort TS Family command-line
interface
Management through the command line
interface
Digi Connect Family and ConnectPort TS Family
121
set ppp
Use the set ppp command to configure PPP connections.
set profiles
Use the set profiles command to configure the port profile for a serial port.
set realport
Use the set realport command to configure RealPort.
set rtstoggle
Use the set rtstoggle command to configure the RTS toggle.
set serial
Use the set serial command to configure the serial port options.
set service
Use the set service command to configure the network services.
set snmp
Use the set snmp command to configure SNMP, including SNMP traps, such as:
n Authentication failure
n Cold start
n Link up
n Login traps
The set snmp command also displays current SNMP settings.
set system
Use the set system command to configure the system identifying information.
set tcpserial
Use the set tcpserial command to configure serial TCP.
set usb
Use the set usb command to configure the USB.
set udpserial
Use the set udpserial command to configure the serial UDP.

Digi Connect Wi-SP Specifications

General

Brand	Digi
Model	Connect Wi-SP
Category	Server
Language	English