40
The JamMan
®
Stereo is capable of recording in different Time Signatures. A
Time Signature must be set up prior to recording in a memory location.
Once a phrase has been recorded, Time Signature cannot be changed. To set
the Time Signature, follow these steps:
Use the 1. SELECT knob or LOOP UP/DOWN footswitches to select a new
memory location. (The LOOP LED and SINGLE LED will be off.)
Press the2. SHIFT button. It will now be lit.
Press the 3. TIME SIGNATURE button. The DISPLAY will now show the number
4 indicating the default Time Signature of four beats per measure.
Use the 4. SELECT knob to change the Time Signature. You can select
from two to 15 beats per measure. This means if you want to record
in 5/4 time, select 5. To record in 7/8 time, select 7, and so forth.
Press the 5. EXIT button.
The STORE button will light when Time Signature is changed but you can
immediately begin recording without having to store this change first. If a
tempo has been set up the TEMPO/STOP footswitch LED will light red for the
downbeat and then green for the rest of the beats of the measure.
When accessing the Time Signature setting of a loop (newly recorded or stored),
the loop’s Time Signature appears in the DISPLAY, but it cannot be changed.
Time Signature
To Next Page
Loading...
Need help?
General
