AC Power
The RP100 can also be powered with the optional PS0913B power supply. Once the audio
connections have been made,turn the RP100’s Master Level (far right knob) all the way down.
Connect the plug of the PS0913B power supply to the power jack on the rear panel of the
RP100.Connect the other end of the PS0913B power supply to an AC outlet.Turn the power of
your amplifier(s) to the on position and adjust the volume(s)to a normal playing level.Gradually
increase the RP100 Master Level to achieve the desired volume.
9
To Next Page
Loading...
Need help?
General
