DigiTech RP100 User Manual

Factory Reset
This function resets the RP100 to its original factory settings.This procedure will erase all
custom user Presets, and recalibrate the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data.All such data
will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1.Disconnect the power supply from the RP100 (AC Power) or unplug the guitar from the input
jack (battery power).
2.Press and hold the Select button while re-connecting the power or plugging your guitar into
the RP100’s input.
3.When the display shows --,release the button and press then press the Store button. The
display will then read rEand the RP100 will reset to the original factory settings.
26

DigiTech RP100 Specifications

General

Brand	DigiTech
Model	RP100
Category	Music Pedal
Language	English