23
CABINET EMULATOR The Valve FX’s programmable Cabinet Emulator circuitry allows you to
use it in both recording and live situations without lugging heavy
amps and/or cabinets around. Just connect the Valve FX outputs to a
mixing console and kick in the Cabinet Emulator. No miking hassles,
no heavy equipment; just a full-on miked cabinet sound. Programs
can be stored with different Cabinet Emulator settings so you can cus-
tomize your banks or setlists for whatever sound types you need.
Parameters are as follows:
Effect On / Bypass ........Turns the Module on or off. When Modules
are turned off, their Parameters disappear
from the Parameter menu. To see the
Parameters, you must turn the Module on.
Cabinet Type.................Selects the tonal characteristics of the simulat-
ed cabinet. There are 10 different cabinet
types; 3 warm cabinets, 3 medium cabinets, 3
bright cabinets, and 1 full bandwidth cabinet
for maximum frequency response. The full
bandwidth cabinet is useful when the Cabinet
Emulator is set globally on (in the Utility menu)
and a full bandwidth sound is still desired.
Section 4 - Effects and Parameters
Valve FX Owner’s Manual
To Next Page
Loading...
Need help?
General
