57
This function is especially useful if you want to use the CC pedal with
a Program in more than one way. For example, you can control the
level of a Delay linked to CC 4. Then, in real time, reassign the pedal
to CC 10 which will control any Parameter in the Program linked to CC
10 (like a Reverb level).
LIST UP / DOWN Another special feature of the Foot Controller menu allows you to step
through custom sequences of Programs using a single footswitch.
These sequences are called Lists. They can be up to 32 steps in
length, and each step has its own Program number assignment. To
use the List, assign a Patch as
List Up
and another as
List Down
.
PRG LIST ASSIGN Once the
List Up
and
List Down
are assigned as Patches,
the actual List of Programs needs to be assigned. The procedure is
as follows:
• Press Function key 2. The display reads:
• Press Function key 3. The display reads:
This display tells you that the list is currently set to be 10 steps
long. You can adjust the number of steps in the List using the
<UP / DOWN> Cursor keys or the Data wheel (a List can have a
maximum of 32 steps). The right arrow on the bottom line indi-
cates that there are more List setup options available by press-
ing the <RIGHT> Cursor key.
• Press the <RIGHT> Cursor key. The display reads:
• Press Function key 1. Using the <UP / DOWN> Cursor keys or
the Data wheel select the step number you want to assign or
change.
• To change the Program number assigned to the selected step
¡Step Number 1
≤™[PROG NAME/#]
List Size:10
≥
¡Patches ™CC Ped
£PrgList Assign≥
¡MIDI Contrst:4
™Foot £Tuner ≥
Section 5 - The Utility Menu
Valve FX Owner’s Manual
To Next Page
Loading...
Need help?
General
