17
Harmony
Harmony Patches and Parts
Singers need a way to configure
different Harmony Voicings for use
in different songs. To accommodate
this, the Vocalist Live 3 provides five
Harmony Patches. This allows the
singer to specify the Harmony Voicing
and Gender Settings in advance and
recall them when needed during a
performance. There are five harmony patches. Each harmony patch
also has an A Part and a B Part. Typically this will be used to specify one
harmony setting for, say, the verse and a separate setting for the chorus.
During the song it is easy to toggle back and forth between the A Part
and the B Part with the simple press of the Part A/B footswitch
Each Harmony Patch stores the Harmony Voicing and Harmony
Gender settings. Harmony Patches do not store the Pre Effects, Pitch
Correct, Guitar Level, Reverb, Delay, Harmony Mix, Humanize or
Harmony Mix parameters.
Store and Recall a Patch
To recall a patch use the Harmony Patch button. Each press of the
button steps to the next Patch.
If you have made changes to a harmony patch, you can store the
changes to the selected Patch by pressing and holding the Harmony
Patch button until the lit Harmony Patch Number flashes twice.
Note: You must make changes to the Patch location you wish to save
them to as there is no way to save changes made in Patch 1 to Patch 5.
To Next Page
Loading...
Need help?
General
